last Update:

11/9/2024

Selector

Quick product selector

Medium cyano cyanoacrylate glue 50g industrial superglue adhesive super gap fill FiveStar Starloc £5.99 150g black flexy cyano rubber toughened cyanoacrylate structural adhesive super glue superglue power £32.99 Masking fluid liquid mask Maskit paint plastic model kit enamel cellulose acrylic tape mask 50ml £3.99 Thick cyano glue instatite 25g superglue adhesive gap filling cyanoacrylate industrial universal £3.50

Odourless cyano foam safe cyanoacrylate glue medium depron safe polystyrene styrofoam super glue 20g £5.99 5 Minute set epoxy resin syringe glue adhesive fast cure solvent free clear bond industrial diy glue £4.99

25g Instatite thin cyano glue cyanoacrylate superglue adhesive super thin fast penetrating starloc £3.50 150g ClearNtuf cyanoacrylate glue clear rubber toughened high impact super flexible flexy adhesive £32.99

ANAEROBIC CURE THREADLOCK AND RETAINER PRODUCTS SELECTION TABLE / CHART

Thread lock selector chart


StarLoc Anaerobic are single part threadlock products for locking all threaded parts against vibration loosening and fatigue / wear plus the added advantages of stopping leakage of fluids and gasses past the threads as well as preventing any build up of corrosion between the two threaded parts.
More reliable than traditional methods,
Easier to use,
Lower cost due to reduced parts,
Threadlockers are 100% reliable unlike other methods of locking ( lock washers, split pins, nylon insert nuts etc... ) and because you can cut down on parts you can lower the costs of an item.
 Starloc threadlockers cure after contact with metals and the absence of air, many other brands of threadlockers wont cure on plated metals or stainless steel etc, Starlocs unique formulations will cure fully even on stainless steel or chrome plate.
If working in cold conditions, with dirty parts or when a high speed cure is required a range of spray on cleaner/primers and accelerators are available to speed cure ( see below )

STARLOC GRADE	EQUV. LOCTITE GRADE	COLOR	VISCOSITY CPS	GAP FILL  mm	MAX TEMP	SHEAR STRENGTH N/mm2	BREAKAWAY TORQUE Nm	PREVAILING TORQUE Nm	CURE TIME MINUTES	NAME	MAIN USES
9-222	222	PURPLE	1000	.5	160C	2-3.5	4-8	2-4	15	SCREW LOC	LOW STRENGTH:EASY DISASSEMBLY:SMALL FASTENERS
9-242	242	BLUE	1000	.1	160C	12	17-22	5-8	3-7	NUT LOC	MED. STRENGTH GENERAL PURPOSE
9-243	243	BLUE	1200	.1	160C	12	17-22	5-8	10	BOLT LOC	OIL TOLERANT, FOR AS RECEIVED PARTS
9-260	260	RED	1300	.25	160C	17	28-32	50-58	10	STUD LOC	HIGH STRENGTH, CAN BE DISASSEMBLED UP TO 6mm
9-262	262	RED	2500	.25	160C	19	30-35	55-65	15	STUD LOC+	EXTRA STRENGTH STUD LOCK 6mm TO 12 mm
9-270	270	RED	500	.25	160C	21	32-40	60-70	10	STUD LOC++	FOR FASTENINGS UP TO 25mm FOR NO DISASSEMBLY
9-272	272	RED	600	.25	160C	22	35-55	55-75	10	STUD LOC+++	EXTRA STRENGTH FOR 25mm+ STUDS
9-277	277	RED	7000	.25	160C	25	35-55	55-75	10	STUD LOC MAX	PERMANENT GRADE STUD LOC FOR V.BIG STUDS
9-290	290	GREEN	15	.05	160 C	16	17-22	5-8	5-10	PENETRATING STUD LOC	MEDIUM STRENGTH, WICKING GRADE FOR POST APPLICATION
9-292	292	YELLOW	15	.05	160C	19	28-32	50-58	5-10	PENETRATING THREAD LOC	HIGH STRENGTH, WICKING GRADE THREAD LOCK FOR POST APPLICATION
9-022		PINK	10-20	.1	160C	2-4			1-3	SCREW LOCK	LOW STRENGTH THREADLOC FOR USE ON PLASTIC / GLASS / METAL / WOOD PARTS
9-024		CLEAR	10-20	.1	160C	15			1-3	NUT LOCK	MEDIUM STRENGTH THREADLOC FOR USE ON PLASTIC / WOOD / GLASS / METAL PARTS
9-077		BLACK	10-20	.1	160C	25			1-3	STUD LOCK	HIGH STRENGTH THREADLOC FOR USE ON PLASTIC / METAL / GLASS / WOOD PARTS

 
Retainer / Bearing Shaft grades selector chart
Single part retainer products for bonding, locking and sealing turned parts, shafts, bearings ( non threaded parts ) , suitable for use on new parts, worn parts, against vibration loosening, vibration fatigue and stress cracking plus the added advantages of stopping leakage of fluids and gasses past as well as preventing any build up of corrosion between the parts.
Retainers are 100% reliable, giving 100% surface contact that is unobtainable with other methods of fitting bearings and shafts etc, press fitting generally gives around 20% to 50 % surface contact, bearing fit gives a totally reliable 100% surface contact that wont leak or work loose over time.
More reliable than traditional methods,
Easier to use, no heating parts before assembly
Lower cost due to faster machining,
tolerances can be relaxed to obtain faster assembly and less rejected parts.
Starloc retainers cure after contact with metals and the absence of air, many other brands of retainer wont cure on plated metals or stainless steel etc, Starlocs unique formulations will cure fully even on stainless steel or chrome plate
If working in cold conditions, with dirty parts or when a high speed cure is required a range of spray on cleaner/primers and accelerators are available to speed cure ( see below )

STAR-LOC GRADE	EQU. LOCTITE GRADE	COLOR	VISCOSITY cPS	GAP FILL mm	CURED STRENGTH N/mm2	SHEAR STRENGTH BREAKAWAY Nm	SHEAR STRENGTH PREVAILING Nm	CURE TIME MINUTES	MAX TEMP (DEG C)	NAME	USE
9-601	601	GREEN	150	..15	20	30-35	55-70	10-15	160	GP. RETAINER	CLOSE FIT PARTS, ROLER BEARINGS, CAMS ETC
9-603	603	GREEN	125	.05	20	30-35	55-70	10-15	160	GP. RETAINER	AS 601, NO PRE CLEANING REQUIRED
9-609	609	GREEN	125	.05	20	30-35	55-70	30-60	160	SLOW CURE GP	SLOW CURE VERSION OF 603
9-620	620	YELLOW	1500	.15	25	30-40	55-70	10-15	280	HIGH STRENGTH HIGH TEMP FAST CURE	UP TO 450 DEG F HIGH TEMP
9-635	635	GREEN	2500	.15	30	30-40	55-75	10	160	MAX STRENGTH FAST CURE	FOR BUSHES,KEYS,SPLINES,TUBING WITH CLOSE FIT
9-638	638	GREEN	2500	.15	30	30-40	55-75	40	160	MAX STRENGTH SLOW CURE	AS 635, BUT SLOW CURE
9-641	641	YELLOW	1500	.2	11.5	12-15	16-22	15	160	CONTROLLED STRENGTH RETAINER	BEARINGS, SHAFTS,REDUCES FRETTING
9-6-48	648	YELLOW	1500	.2	25	30-35	55-70	3-5	180	HIGH STRENGTH, FAST CURE	UPTO 180 DEG C, ELECTRIC MOTORS,PULLEYS,BEARINGS ETC
9-660	660	RED	3000	.3	25	30-40	55-70	60+	160	EXTRA GAP FILL	WORN SHAFTS,PULLEYS ETC

ACCELERATOR / PRIMER ( spray on )

TO SPEED CURE OF THREAD LOCKERS AND RETAINERS

SIMPLY APPLY THIS PRODUCT TO ONE SURFACE BEFORE ASSEMBLY TO SPEED CURE ON CLEAN PARTS, USE DEGREASER / PRIMER TO CLEAN AND PRIME DIRTY PARTS

CODE	TYPE	DESCRIPTION
ANP N /50		Primer / activator for threadlock / retainer / gasket sealer solvent based
ANP N/150	""	AS ABOVE, LARGER SIZE
ANP `T`/50		Primer / activator for threadlock / retainer / gasket sealer solvent free
ANP T/150	""	AS ABOVE, LARGER SIZE
DEG / 50	DEGREASER / PRIMER	FOR CLEANING PARTS PRIOR TO ASSEMBLY
DEG / 150	DEGREASER / PRIMER	FOR CLEANING PARTS PRIOR TO ASSEMBLY